NEW 10K, 14K, 18K, Gold and Silver Test Acid Kit Tools Scratch Stone

Description

4pc Gold Testing Acid Solutions + Test Stone
10K (x1)
14K (x1)
18K (x1)
Silver (x1)
2" Testing Stone (Size may vary between 2x1.5 and 2x3)
The 0.5 Ounce bottles contain enough acid for hundreds of tests!
Gold testing via acid solutions is a classic way of testing gold items for their karat values. This method is best used on scrap gold to be smelted due to the destructive nature of the testing but can be used on gold pieces to be worn if the testing if done in an inconspicuous spot.
PLEASE NOTE: Gold testing acids are made using
NITRIC ACID
that can harm the skin. Please exercise caution when using this method of testing, including proper protective eyewear and gloves. Nitric Acid can burn the skin and leave stains.
Procedures for Testing Gold, Platinum and Silver
To test for the karat value of gold, platinum, and silver, you will need the following materials and tools:
Black acid testing stone that is washed thoroughly with water prior to each test OR a needle file
Acids
Reference Gold - Either Gold Testing Needles or Verified Gold Pieces
Testing for 10K, 12K and 14K
Scratch or Rub the piece onto the test stone, leaving a visible deposit of gold on the stone. Next to this position, scratch the appropriate needle (10, 12, or 14K) - if you do not have needles you can use a gold item that has a known karat value. Place a drop of the appropriate acid (same solution as the needle/gold item you have used) on the stone where the gold deposits are. If the gold is the same karat or higher, the acid will not affect the gold marks. If the gold piece is of a lower karat, the scratched deposit will dissolve and eventually disappear while the mark from the needle will stay.
When testing for potential gold plated items such as heavy necklaces and earrings, use a metal file to make a slight gouge in the piece. Place a drop of acid (the acid should match the karat value of the gold on the piece) onto the gouge. If the item is gold-plated, the acid will slowly dissolve the metal underneath. If the item is pure gold, no reaction should occur.
By repeated trial, the karat of the gold pieces can be determined to a close approximation.
(Caution: Many objects are marked 14K, but were fabricated prior to 1982 when it was legal to mark items 14K, but in reality the gold was 13.5K When testing 13.5K gold the 14K solution will not dissolve the scratch, but will make it lose its brightness and will turn it into a yellow-rusty color)
Testing for 18K
Repeat the steps from above and apply 18K acid. Any gold that is less than 18K will disappear in less than 30 seconds. Gold that remains on the stone is 18K or higher.
Testing For Silver
Place a drop of acid on the object to be tested.
Color Results:
Fine silver .999 =  bright red
.925 silver = dark red
800 silver = brown
500 silver = green
Testing for White Gold
The same procedure and Testing Acid for platinum can be used for 18K white gold . The material on the stone should start changing to a light bronze color in about three minutes. For 14K white gold, the material on the stone should disappear in 15 seconds.
NOTE: We are an authorized distributor of JSP.
JSP is the only manufacturer for all gold testing acids in the United States. If you purchase any acids in the U.S. with another brand name, it is inauthentic. Therefore they may not perform as expected.
Because our acids are authentic, we can guarantee they are sealed, fresh, and that we rotate our stock frequently.